ARNO Instant Hot Tap: Installation & Care Guide

Installation Guide

1. Prepare the Necessary Tools
· Wrench
· Screwdriver
· Pipe sealant tape
2. Installation Steps
· Turn off the water supply and remove the old tap.
· Connect the inlet pipes according to the manual, ensuring tight and secure fittings.
· Connect the power supply (for electric heating models) and ensure the socket meets safety standards.
· Turn on the water supply and check for any leaks.
· Run water through the tap for the first time to check the temperature control system.

Maintenance and Care

1. Regularly Clean the Filter
· If the tap has a filtration function, replace the filter cartridge every 3-6 months to maintain water purity.
2. Prevent Limescale Build-Up
· If you use hard water, clean the heating element periodically to prevent limescale from reducing efficiency.
3. Check Electrical Safety
· If your tap uses an electric heating system, regularly inspect the power plug for signs of aging to ensure safe operation.

Usage Precautions

· Avoid running hot water continuously for extended periods to prevent damage to the heating element.
· In cold weather, drain the internal water to prevent pipes from freezing and cracking.
· If not in use for an extended period, disconnect the power and turn off the water supply.