Practical Guide to Installing and Maintaining Your ARNO Instant Hot Water Tap

    Posted by LuRomy posted on March 14, 2025
    Practical Guide to Installing and Maintaining Your ARNO Instant Hot Water Tap
    After purchasing an ARNO instant hot water tap, proper installation and maintenance are crucial for ensuring long-term efficiency and performance. Below are the detailed installation steps and maintenance tips.

     

    Installation Guide

    1. Prepare the Necessary Tools
    · Wrench
    · Screwdriver
    · Pipe sealant tape
    2. Installation Steps
    · Turn off the water supply and remove the old tap.
    · Connect the inlet pipes according to the manual, ensuring tight and secure fittings.
    · Connect the power supply (for electric heating models) and ensure the socket meets safety standards.
    · Turn on the water supply and check for any leaks.
    · Run water through the tap for the first time to check the temperature control system.

    Maintenance and Care

    1. Regularly Clean the Filter
    · If the tap has a filtration function, replace the filter cartridge every 3-6 months to maintain water purity.
    2. Prevent Limescale Build-Up
    · If you use hard water, clean the heating element periodically to prevent limescale from reducing efficiency.
    3. Check Electrical Safety
    · If your tap uses an electric heating system, regularly inspect the power plug for signs of aging to ensure safe operation.

    Usage Precautions

    · Avoid running hot water continuously for extended periods to prevent damage to the heating element.
    · In cold weather, drain the internal water to prevent pipes from freezing and cracking.
    · If not in use for an extended period, disconnect the power and turn off the water supply.

    With proper installation and maintenance, your ARNO instant hot water tap will provide a convenient and efficient water heating experience, ensuring a hassle-free kitchen life.
    Back to News